Parts VM 26-44


Mikuni Products ] Customer Support and Feedback ] Site Contents ] [Back to Contents Page]




Back Up Next

Click the up arrow () to go to the top of the diagram.

No  Description VM26 VM28  VM30 VM32 VM34 VM36 VM38 VM40 VM44
1. RUBBER CAP, throttle cable VM26/46
2. CABLE ADJUSTER M21/14
3. LOCKNUT, cable adjuster B30/247
4. TOP, mixing chamber VM26/56 VM34/27 VM36/09 VM44/05
5. GASKET, mixing chamber top   VM34/29 VM36/06
6. SPRING, throttle valve VM28/257 VM34/50 VM34/55 VM44/13
7. PLATE, spring seat VM28/132 VM34/31 VM35/09 VM44/09
8. CLIP, needle positioning VM20/369 BS32/126
9. NEEDLE #5 SERIES #6 SERIES #7 SERIES
10. THROTTLE VALVE(SLIDE) VM28/56 VM34/110 VM36/36 VM38/24 VM44/2
No  Description VM26 VM28  VM30 VM32 VM34 VM36 VM38 VM40 VM44
11. NEEDLE JET VM28/86(182) VM30/38(169) VM34/05 159 VM34/17(166) VM44/10(224)
12. RUBBER CAP, starter plunger VM28/455
13. FITTING, starter plunger VM26/116 VM20/456
14. LEVER, starter VM28/135 VM28/497 VM28/124 VM32/53 VM36/58
15. SPRING PLATE, starter level VM26/09 VM32/17
16. SPRING, starter plunger VM16/42
17. PLUNGER, starter   VM18/144
18. BODY, mixing chamber      
19. GASKET, float bowl VM28/129 VM30/103 999-631-010 VM36/20           VM36/20
20. BAFFLE PLATE, float bowl   VM34/72 VM36/40 VM44/12
No  Description VM26 VM28  VM30 VM32 VM34 VM36 VM38 VM40 VM44
21. PILOT JET VM22/210
22. PIN, float arm hinge BV26/22
23. ARM, float VM28/166 VM34/73 VM36/15
24. FLOAT VM28/164 VM34/61 VM24/236
25. BOWL, float   VM34/68 VM36/07 VM44/04
26. WASHER, main jet plug VM28/134 4/053 VM28/134
27. PLUG, main jet VM28/133 VM34/42 VM36/14 VM38/08 VM28/133
28. AIR JET BS30/97
29. AIR ADJUSTING SCREW VM20/214
30. SPRING, air adjusting screw M12F/464
No  Description VM26 VM28  VM30 VM32 VM34 VM36 VM38 VM40 VM44
31. SPRING, idle adjusting screw M20/11
32. IDLE ADJUSTING SCREW VM24/224 VM28/142 VM24/224 VM22/171 VM24/224
33. WASHER, needle valve VM26/25 B34/52
34. NEEDLE VALVE & SEAT ASSY. VM26/26 VM34/39                         OR VM38/11-3.5
35. RING, main jet VM28/228 VM36/17 VM28/228
36. MAIN JET 4/042
37. PLATE, vent tube anchor VM15/164 VM28/79
38. SCREW, float bowl CW2=0416 CW2=0518 CW2=0516 CW2=0518

 

 Up ] VM Round Slide Dimensions ] Jetting Specs ] Carb Parts VM 18mm ] [ Parts VM 26-44 ] VM Tuning Manual ]

T. D. Hatrick and Co., Pty Ltd, 93 Ingham Rd, Townsville, 4810
Phone: 07 47712677    Fax:  07 47211616  P.O. Box 5302, Townsville 4810
Email: tdh@mikunioz.com 
Copyright © 2002  Oz Effects Web Design. All rights reserved.
Last modified: Tuesday April 30, 2002.