|
Mikuni HSR Accessories
Click to go direct to the
accessory list you need then click
to view contents again.
Accessories
Page Contents
For the installation of HSR Carburetor Kits using the Mikuni K&N high flow
filter on Big Twins and Twin Cam.
|
Part |
Description |
Price |
| KHS-010 |
To
mount HS40 carb and air filter, includes breather bolts and brackets |
|
| KHS-020 |
To
mount HSR42/45 carb and filter to Evo Big Twins, does not include
Z-brackets. (Note: Z-brackets are found in the Evo HSR Carb Kits). |
|
| KHS-030 |
To
mount HSR42/45 carb and filter to Twin Cam engine, includes the new
chrome banjos, vent bolts and brackets. |
|
Jet Assortment Kit for
HSR42
This jet assortment kit contains 44 pieces in a special jet box. Included are 2
each 150 thru 170 (1 only 160) main jets, 2 each 22.5 thru 35 pilot jets (1 only
30), 1 each -95, -96 and
-97 HSR42 needles, 2 each #60 a/p nozzles, needle clip and washers.
|
Part |
Description |
Price |
|
KHS-025 |
Jet
Kit with box, 44 piece assortment. |
|
HSR42/45
Carburetor Rebuild Kit
All the necessary parts and gaskets to freshen up an HSR42 or 45. Includes
needle valve assembly, O-rings, gaskets and screws.
|
Part |
Description |
Price |
|
KHS-016 |
Rebuild Kit for HSR42/45. See
HSR Carb Parts for contents. |
|
Optional and
Replacement Parts
|
Part |
Description |
Price |
|
990-605-065 |
Short
Idle Screw Adjuster (optional). Use spring from stock Idle Cable. |
|
|
TM42/32
|
Long Idle Cable Adjuster (standard), does not include spring. |
|
|
990-662-002 |
Choke Cable, enrichener. |
|
|
HS42/001 |
Air Box Adapter, mounts to back plate with three screws. |
|
|
HS42/002 |
Adapter Screws, use three per adapter. |
|
|
HS42/003 |
O-Ring Seal for Airbox Adapter. |
|
|
HS42/018-42 |
Rubber Flange Adapter, round inlet, 42mm black (with TMX/002-32 clamp). |
|
|
HS42/018-45 |
Rubber Flange Adapter,
round inlet, 45mm black (with TMX/002-32 clamp). |
|
|
HS42/061-45 |
Intake Manifold for HSR42/45 mm,
oval inlet, Evo style without hole. |
|
|
HS42/061-45TC |
Intake Manifold for
HSR42/45 mm, oval inlet , Twin Cam style with MAPS hole. |
|
|
HS42/062-42 |
Rubber Flange Adapter,
oval inlet, 42mm silver (with TMX/002-32 clamp). |
|
|
HS42/062-45 |
Rubber Flange Adapter, oval inlet, 45mm silver (with TMX/002-32 clamp). |
|
|
TMX/002-32 |
Clamp for rubber flange, stainless steel. |
|
|
HS42/012 |
Air Filter, K&N 2.5 inch, standard in kits, washable |
|
|
HS42/012-300 |
Air Filter, K&N 3.0 inch, high performance, washable |
|
HS42/019 |
Bracket,
air cleaner to head |
|
|
RS36/47 |
Steady
Plate, Air cleaner stud |
|
|
RS36/37 |
Elbow,
plastic, for breather hose to A/C |
|
RS36/23 |
Bracket,
choke cable to frame |
|
|
HS42/006 |
Air Cleaner Cover, chrome w/cutouts |
|
|
HS42/021-250 |
Air Cleaner Cover, chrome wo/cutouts |
|
|
KHS-028 |
Chrome Carb Top Cover wo/Mikuni logo |
|
|
KHS-029 |
Chrome Carb Top Cover w/Mikuni logo |
|
Jetting
Parts
High speed (main), low speed (pilot) jets, needles and accelerator pump nozzle
for the HSR42/45 carburetors.
Part/
Size |
Description |
Price |
|
VM28/486 |
Pilot Jets, size range 20 to 50 (2.5 increments) |
|
|
N100.604 |
Main Jets, size range 150 to 200 (2.5 increments) |
|
|
J8-8DDY01 |
HSR42 Jet Needles, size -95,-96,-97 and-98, standard in
HSR42 is -97 |
|
|
J8-8CFY02 |
HSR45,48 Jet Needles, size -95,-96,-97 and 98, standard in
HSR45 is -96. |
|
|
TM42/11 |
Accelerator Pump Nozzle, size -50, -60,and -70, standard
is -70 |
|
Throttle
Cables
HSR42/45 Carb Kits sold from 1994 to1999 required special Mikuni throttle
cables (LH throttle crank). HSR42 carbs manufactured after May 1999 (RH throttle
crank with plastic wheel), and HSR45 manufactured after
March 2000 use stock Harley-Davidson cables.
Part |
Description |
Price |
|
HS42/028-A |
Open (Throttle) Cable, 1970 to 1995, 38 inch screw-in type. |
|
|
HS42/029-A |
Close (Idle) Cable, 1970 to 1995, 38 inch screw-in type. |
|
|
KHS/039 |
Open (Throttle) Cable, 1970 to 1995, 47 inch screw-in type. |
|
|
KHS/040 |
Close (Idle) Cable, 1970 to 1995, 47 inch screw-in type. |
|
|
KHS/043 |
Open (Throttle) Cable, 1996 to present, 38 inch push-in type. |
|
|
KHS/044 |
Close (Idle) Cable, 1996 to present, 38 inch push-in type. |
|
|
KHS/041 |
Open (Throttle) Cable, 1996 to present, 47 inch push-in
type |
|
|
KHS/042 |
Close (Idle) Cable, 1996 to present, 47 inch push-in type. |
|
|
